One of the guidelines for maintenance of hydraulic tube bending machine is that the hydraulic system of the equipment must be discharged and refilled regularly, because keeping the oil clean is very important to the operation of the whole system. 

Regular discharge of water and sediment from the hydraulic tube bending machine’s tank is critical to removing impurities from the oil. At the same time, the oil in the entire hydraulic system must be vented periodically to completely remove system impurities and oxidized hydraulic fluid. Oil and other harmful substances. Once completed, the clean hydraulic pressure needs to be re-added to the system.

Eight methods for hydraulic tube bender maintenance:

1. Operate the tube bending machine in strict accordance with the operation rules.

2. check triangle belt, handle, knob, button, wear and repair, and report spare parts.

3. Check the repair switch, safety and handle regularly to ensure its reliability.

4. 10 minutes before work every day, lubricating and cleaning pipe bender.

5. Non-designated personnel are strictly forbidden to operate the equipment.

6. According to the lubricating chart, fixed time, fixed point, add lubricating oil, oil should be clean and no deposit before operation of tube bender.

7.tube bender must always keep clean, unpainted part of antirust grease.

8. The lubricating oil in the motor bearing should be replaced regularly and the electrical parts should be checked to be safe and reliable.