Tel: +86 13921985178

E-mail: Annyzhao2000@hotmail.com

Home > News > Content
Pipe Cutting Machine Precautions
- Sep 30, 2018 -

1. The spindle speed must be carried out after parking. Gear must be fully engaged when changing speed.When the machine is found to be abnormal, stop the check immediately. 

2. Before cutting, adjust the tool and clamp the work object. The clamping part shall be not less than 50 mm in length.

The parking baffle must be fixed, and after commissioning, the clamping, loosening, forward and backward order can be carried out. 

3. When the machine is turning, no part of the human body should touch the transmission parts. When operating, to tie the cuffs, strictly forbidden to wear gloves work.

The head of the body should deviate from the cutting direction. 

4.When changing the tool, measuring the workpiece, lubricating, cleaning the pipe head, must stop. 

5.When cutting the pipe head, to prevent the tube head from flying hurt people. 

6.When the long material pipe is put into the rack and loosen the strapping wire, measures should be taken to prevent the tube from rolling, pounding and wounding. 

7.The use of grinding wheel cutting machine, should be checked in advance the grinding wheel cracks, damp, the power cord is reliable. 

8.The dedusting device of the pipe cutting machine should be in good condition before cutting. 

9.The workpiece in and out of the direction of the person should not stand.