Clamp Die Our company specialized in supplies of press brakes tools for various press brake models 、Clamp Die and manufacturers. We are able to offer any standard or special types of tools (punches and dies, hemming sets, stamps, punchholders, die holders, adapters, die inserts, radius tooling...
Our company specialized in supplies of press brakes tools for various press brake models 、Clamp Die and manufacturers.
We are able to offer any standard or special types of tools (punches and dies, hemming sets, stamps, punchholders, die holders, adapters, die inserts, radius tooling etc.) for main press brake systems such as Amada, LVD, Accurpress, ACL, Prima power, Haco, Salagnini, MVD, Colgar, Dener, Deratech, Promecam–EURO Style, Trumpf-WILA, Beyeler, Yangli, Yawei, Ysd etc. We can supply rich selection of standard shapes or to make any special tools under request of customer including the length of 6000-8000 mm in one piece.
If necessary, together with the offer we are able to make our recommendations, provide bending sequence for the part of the customer, calculate bending charts, verify the necessity to use special tools and other sales and service support.
The working process of the punching die is divided into the following parts according to the movement time sequence of the punching machine:
The punch slider drives the upper die to move downward from the highest point when the die is opened, and the lower die is not in contact. When the upper plate contacts the punch of the lower die, the upper plate stops moving, the punch slider continues to move downward, the upper die release spring begins to compress, and the upper release plate is pressed by the spring pressure. After a certain stroke The punch attached to the upper plate contacts the punch,
The punch slider continues to move downwards. When approaching the bottom dead center (closed mold state), the punch is completely inserted into the lower die hole to complete the punching.
The punching material falls from the lower template to the lower pad to the leakage hole of the lower die holder,
After the punch passes through the bottom dead center, the punch slider drives: The mold starts to rise. At this time, due to the pressure relief, the upper strip removes the punch from the punch due to the spring force of the upper mold. Take off.
The punch slider drives the upper die to continue upward, returning to the highest point when the mold is opened, and completing a stamping process.
The top pin of the lower template is topped to return the punch.
1. Support customized
2. Logo and label can be printed
3. Practical and easy to set and replace All specifications are acceptable
4. competitive price
5. fast delivery and safety package
6. Competitive price,Durable,Persistent,Precision
7. Specialize in this area