CNC Bar Bending Machine
CNC Bar bending machine The essence of the CNC Bar bending machine is a CNC bending machine mold for bending a thin plate. The mold is composed of a bracket, a work table and a clamping plate. The force of the pressure plate is generated by energizing the coil, thereby completing the...
CNC Bar bending machine
The essence of the CNC Bar bending machine is a CNC bending machine mold for bending a thin plate. The mold is composed of a bracket, a work table and a clamping plate. The force of the pressure plate is generated by energizing the coil, thereby completing the relationship between the pressure plate and the base. The clamping of the thin plate. Because of the electromagnetic force clamping method, the pressure plate is made according to the specific workpiece requirements, the operation is simple, and the workpiece with the side wall can be processed. The plastic sheet metal bending machine is developed according to the principle of heating and soft melting welding of plastic sheets, which is suitable for the folding angle of all thermoplastic materials. CNC plastic sheet bending machine mould has the following characteristics: direct bending, no need for splicing, no need for slotting, no need for welding rod, its angle of appearance is not leaky, and the processing speed is fast, the surface of the angle is beautiful, strong and wide High, it transforms manual welding into fully automatic machine operation, improves quality, removes labor efficiency, reduces labor costs, and greatly shortens the product production cycle.
1. The bending machine section is economical and reasonable, saving material. The cross-sectional shape of the cold-formed steel equipment can be designed according to requirements, the structure is reasonable, and the section coefficient per unit weight is higher than that of the hot-rolled steel. Under the same load, the weight of the component can be reduced and the material can be saved. Cold-formed steel is used in building structures to save 38-50% of metal compared to hot-rolled sections, and can save 15-60% of metal for agricultural machinery and vehicles. Convenient construction and reduce overall costs.
2. It can produce various profiles with uniform wall thickness and complicated cross-section shape and cold-formed steel of various materials which are difficult to produce by general hot rolling method.
3. The surface of the steel made by the bending machine is smooth, the appearance is good, the size is accurate, and the length can also be processed according to the needs.
Bending machine operation instructions:
1. Check the coincidence and firmness of the upper and lower molds of the bending machine, and check whether the positioning devices meet the requirements of the machining.
2. When the upper slide plate and each positioning axis are not in the state of the origin, the homing program is run.
3. Before starting the bending machine, carefully check whether the motor, switch, circuit and grounding are normal and firm, and check the operating parts of the equipment. The button is stuck in the correct position.
4. After the start of the bending machine, the air is running for 1-2 minutes, and the upper slide is fully 2-3 times. If it is found that there is abnormal sound or there is a fault, it should stop immediately, and the fault will be eliminated.
Number of trips
Maximum opening height
main motor power