Tel: +86 13921985178

E-mail: Annyzhao2000@hotmail.com

CNC Pipe Bending Machine

CNC Pipe Bending Machine

CNC pipe bending machine CNC pipe bending machine has standard machine type special machine standard model can reach 1.5 times pipe diameter bending radius special machine can reach 1.0 times pipe diameter bending radius, CNC automatic pipe bending machine, pipe bending, feeding, The turrets are...

Send InquiryChat Now
Product Details

CNC pipe bending machine

CNC pipe bending machine has standard machine type special machine standard model can reach 1.5 times pipe diameter bending radius special machine can reach 1.0 times pipe diameter bending radius, CNC automatic pipe bending machine, pipe bending, feeding, The turrets are all controlled by servo motors. Easy to learn and understand with LCD touch screen menu operation Easy program setting. It has its own detection and error message display to facilitate the elimination of operational errors and malfunctions. The sunken clamp can avoid interference, pump plug pump, save energy, and provide stable hydraulic pressure. The automatic pipe bender is also suitable for thin pipe or small bending radius (1.0D-1.5DCLR). The minimum deformation amount can be achieved with a slow core pulling function to improve the bending quality. The accuracy of the feeding length is ±0.1mm. The accuracy of the pipe angle is ±0.1 degrees. The accuracy of the pipe angle is ±0.1 degrees.

 

CNC pipe bending machine characteristics

1. Machine tool / workpiece dynamic characteristics automatic identification - processing is fast and slow core retreat, car boost - improve the appearance of the corner of the whole process Chinese (or English) operation tips + 15 inch true color display + touch screen - simple and clear operation .

2. Graphical programming system: On the screen, the three-dimensional tube line is drawn/modified, that is, the processing program - simple, fast and accurate programming. Rebound measurement of a batch of pipe characteristics can be compared and measured

3. Single-step debugging function---The observation of the tube deformation process during the trial production of the mold into the micro-automatic drawing of the mold drawing---helping the development of new products.

4. Comprehensive monitoring: hydraulic / electrical / transmission system, motor phase loss / reversal, voltage, temperature, oil pressure, and automatic diagnosis of faults, passwords, keys, working hours / quantity records, for production management.

 

Mechanical characteristics

1. Pneumatic clamping pneumatic feeding, accurate feeding. The high-speed saw blade is used to cut the copper pipe, and the hydraulic motor is used to drive the bending, the bending angle is accurate, and the equipment runs smoothly.

2. Simple operation: centralized control by programmable control, automatic setting of parameters through Mitsubishi touch screen, manual, jog, automatic control, flexible and convenient programming, only one switch can complete the entire complex bending process .

3. The performance is stable and reliable: the whole machine adopts imported high-quality electrical components to ensure the perfect function of the equipment.

4. Adaptability: Replace different bending modes to meet the needs of a variety of products.

 

Instructions:

1. Put the oil drain screw on the electric oil pump; tighten it to bend the pipe.

2. First screw the working cylinder into the internal thread of the square block, so that the wheel on the bracket at the rear end of the cylinder is downward;

3. Select the die according to the outer diameter of the bent pipe; fit over the plunger;

4. The groove corresponding to the two rollers is directed toward the die, and then placed in the corresponding size of the flower plate hole,

5. Fully automatic pipe bending machine bends the pipe to loosen the oil drain screw, plunger,

6. Place the upper plate on the upper plate, insert the bent pipe into the groove, and pull the movable part of the quick joint at the end of the high pressure oil pipe back and fit it on the joint of the working cylinder.

 

Specification/Model

DW-75CNC

Max Capacity for seel pipe

75.0*3.0mm

Max capacity for stainless steel

60*2.0mm

Max bending radius

300mm(Accordingly)

Min bending radius

1.5D(Accordingly)

Max bending angle

185°

Max feeding length

3000mm(Can be longer)

Bending method

Hydraulic bending

Bending speed

Max 70°/s

Bending accuracy

±0.15°

Motor power

7.5KW

Hot Tags: CNC pipe bending machine, China, suppliers, manufacturers, factory, wholesale, customized, in stock, made in China
Related Products
Inquiry