Copper Pipe Bending Machine
copper pipe bending machine The copper pipe bending machine can be further divided into: upper, lower and manual according to the movement mode. The utility model comprises a bracket, a worktable and a clamping plate, the worktable is placed on the bracket, the worktable is composed of a base...
copper pipe bending machine
The copper pipe bending machine can be further divided into: upper, lower and manual according to the movement mode. The utility model comprises a bracket, a worktable and a clamping plate, the worktable is placed on the bracket, the worktable is composed of a base and a pressure plate, and the base is connected with the clamping plate through a hinge, the base is composed of a seat shell, a coil and a cover plate, and the coil is placed on the seat shell In the recess, the top of the recess is covered with a cover. When in use, the coil is energized by the wire, and after the power is applied, the platen is attracted to the platen, thereby achieving the clamping of the plate between the platen and the base. Thanks to the electromagnetic force clamping, the pressure plate can be made into a variety of workpiece requirements, and the workpiece with the side wall can be processed. The bending machine can replace the bending machine mold to meet the needs of various workpieces!
Mechanical characteristics of automatic pipe bending machine:
1. The elbow head can be moved laterally along the guide rail. This is necessary after the bender is adjusted to adjust the bending slot of the machine to the center line of the machine. This is simpler than adjusting the machine centerline with the guide rails and tailstock on the adjustment bed. When bending, as the trolley acts as a load, it is pulled forward by the pipe. In order to improve the bending, the wall thickness of the curved portion of the pipe is prevented from being excessively thinned, the rebound is reduced, and the boosting device is added.
2. A more reliable and practical method that is not very precise: first compare the radius of the paper with the radius of the curved tube, and repeatedly correct the size of the paper circle until it matches the radius of the curved tube. The diameter of the paper shell circle is then measured by a measuring ruler and converted into the radius of the curved tube.
3. Fully automatic hydraulic CNC bending machine uses the principle of moldless molding technology and hydraulic servo control technology, adopts industrial control juice machine for tube arc design and bend control, computer generates bend curve data, controls hydraulic servo system to bend Tube processing.
4. Completely changed the processing method of traditional hand-made or profiling of vehicle skeleton arc rods, overcomes and breaks the drawbacks and limitations of using mold processing, and the bending curve is flexible and easy to modify, especially according to the rebound of the pipe. The amount of curvature is corrected, which greatly improves production efficiency and machining accuracy.
Structure and features:
1. It adopts all-steel welded structure with sufficient strength and rigidity.
2. Hydraulic transmission, the oil cylinders at both ends of the machine are placed on the slider to directly drive the sliding work. 3. The slider synchronization mechanism uses the torsion axis to force synchronization. 4. It adopts mechanical block structure, which is stable and reliable.
5. The slider stroke is maneuvered quickly, manually fine-tuned, and the counter is displayed.
6. Oblique wedge compensation mechanism to ensure high bending accuracy.
7. The main circuit of the automatic pipe cutting machine adopts the imported PLC computer to control the work, the operation is simple, sensitive and easy to maintain;
8. The automatic feeding of the pipe cutting machine adopts servo motor, precision screw, linear bearing and pipe cutting machine with cutting precision of ±.0.1mm;
9. The pipe cutter counter can set the number of machining to stop automatically;
10. The counter can accumulate a record of the workload of one day;
11. The total pressure of the pipe cutting machine, the front and rear pressures can be adjusted without any steps to ensure that the workpiece surface is not pinched and deformed;
12. When the pipe cutting machine size is changed, no manual positioning or hardware positioning is required.
13. Simply change the size correction on the text display to work;
14. Pipe cutting machine for capillary, thin copper and aluminum profiles have significant efficiency, time saving, material saving, (to minimize the remaining tailings, to make up for the customer's valuable materials);
15. This pipe cutting machine is suitable for cutting and plasticizing various copper, aluminum and plastic pipes.
|Maximum bending capacity(carbon steel for example)|