Industrial Pipe Bender

industrial pipe bender

After a period of use, the industrial pipe bender has a good effect. Its obvious feature is to reduce the labor force by 50%. It completely eliminates the state of 4~5 people turning around the putter in the past; the quality of the pipe is improved, the efficiency is increased by 30%; The cost is only 20% of the ordinary pipe bending machine; the structure is simple, the operation is easy, and the maintenance is easy; it is not restricted by the climatic conditions. For example, the hydraulic pipe bending machine needs to change the hydraulic oil according to the temperature or heat, etc.; according to the angle of the pipe bend The position switch is set at an appropriate position to facilitate the automatic control of the elbow; the scope of application is wide.

Operating procedures:

According to the pipe diameter of the processing pipe and the radius of curvature of the forming, a complete set of corresponding molds (including forming wheel, pressure wheel, guide wheel, slip, etc.) is provided. Table 1 is the hole type parameters of the pressure roller and the guide wheel of the partial specification elbow.

When processing a snake of a certain size:

1 change. The corresponding mold;

2 Loosen the pressure roller, the guide wheel and the movable slip, and insert it into the processing pipe to adjust it to the pressing state;

3 start the pipe bending machine, rotate the forming wheel and drive the tube clamped by the slip to bend around the forming wheel;

4 When the bending switch is reached when reaching a certain bending angle, the power is turned off;

5 Release the slip, pressure roller and guide pulley, take out the pipe fittings and proceed to the next working cycle until the processing is completed.

Features:

1. Operated by the NC control unit, imported electrical and hydraulic components.

2. English display and session operations.

3. It can adjust the speed of each bending and the bending precision is high.

4. 16 sets of bending information can be stored. Multiple angles can be done once.

5. The foot switch has an automatic start, emergency stop and recovery function. High security.

6. The delicate design of the curved head makes the bending space larger.

7. Applicable materials: steel pipe, stainless steel pipe, copper pipe, aluminum pipe, etc.

Manual operation:

(1) Press the start and stop button first, and the oil pump runs.

(2) The clamp clamping release is operated by the "clamp clamping, loosening" selection switch. When the "clamping" is hit, the clamp is clamped; when it is "released", the clamp is released; When it reaches the middle, the clamp stops.

(3) The elbow forward and backward is operated by the "bend forward and backward" selector switch. When the "forward" is hit, the elbow advances; when the "reverse" is hit, the elbow retreats; when hitting the middle, The elbow stops moving.

Automatic operation:

(1) The value is set after the angle limit switch required for the curve.

(2) Press the start/stop button of the oil pump to operate the oil pump.

(3) Turn the "Manual/Automatic" selector switch to the automatic position. Pressing the start button will automatically complete the "clamp clamping" → "bend forward" → "clamp release" → "bend back" → "stop" to complete a cycle. Pressing the start button again will start the next cycle and cycle through.