Double Head Hydraulic Tube Bending Machine
double head hydraulic tube bending machine The double head hydraulic tube bending machine adopts single-chip computer control, convenient operation and stable performance. The double-end bending synchronous shape opens the curved tube of the workpiece. The angle is accurate. The double-end...
double head hydraulic tube bending machine
The double head hydraulic tube bending machine adopts single-chip computer control, convenient operation and stable performance. The double-end bending synchronous shape opens the curved tube of the workpiece. The angle is accurate. The double-end bending angle can be adjusted from 0-180 degrees, but the material intake problem must be considered. Two different angles of curvature can be created. Applicable to the automotive industry, shipbuilding industry, boiler industry, furniture industry, power industry, fitness equipment, bicycles, electric vehicles, motorcycles, security doors and windows.
1. According to different bases, it can be divided into standard type and rotary type.
2. Optional manual, automatic, semi-circular and other functions.
3. Single-chip control, imported electric components. The program can be stored permanently and will not be lost.
4. The foot switch has automatic start, emergency stop, emergency stop and power-on functions, and has high safety.
5. The two sets of heads can be operated individually or simultaneously.
6. Three pieces can be bent once.
7. The control system is divided into ordinary PLG type and touch type CNC type, which is flexible.
8, different bending radii can also be processed at the same time, a wide range of applications.
9. The elbow has strong bending ability and precise processing.
10. Multiple pieces can be processed at the same time, cycle operation, high efficiency.
11. Compact appearance, simple design and maximum bending space.
12. Microcomputer control, easy to operate, stable performance, double-head bending and bending at the same time. The elbows are open and the angles are consistent and accurate.
13. The angle of the double-headed elbow can be adjusted from 0 to 185 degrees, but the recycling problem must be considered.
14. Two axes can be set to bend at different angles.
1. The machine tool must be well grounded and the wire must not be less than 4mm2 copper wire. Access to power supply voltages outside the specified range is not allowed. The plugin could not be inserted. The control loop cannot be tested with a megger, otherwise the device may be damaged.
2. When plugging or unplugging the connector, do not pull the wire or cable to prevent the solder from falling off.
3, proximity switches, encoders, etc. can not be hit with a hard object.
4. You cannot use a sharp object to collide with the display unit.
5. The electrical box must be placed in a ventilated place, and it is forbidden to work in dust and corrosive gases.
6, can not be installed and changed to PC input and output.
7. The motor steering must be reconfirmed when replacing the machine power supply.
8. The machine should be kept clean. In particular, it should be noted that there should be no foreign objects in the sliding groove, such as clamping blocks and sliders.
9. Regularly add lubricant to the chain and other sliding parts.
10. The power must be disconnected during cleaning and maintenance.
11. Preparation before driving: Check if the oil level of the fuel tank is at the oil level line, refueling the lubrication point, confirm the motor steering when the power is turned on, check the oil pump for abnormal sound, check the oil leakage after the hydraulic system starts the machine (the angle encoder is not allowed) Refueling);
12, pressure regulation: use electromagnetic spill valve to adjust the pressure to ensure that the system pressure reaches the required working pressure, generally not higher than 12.5Mpa.
13. Mold adjustment: mold installation requires mold and clamping block alignment, clamping block can be adjusted with bolt; pressurizing block and mold centered, pressurizing block adjustable; core and mold centered, loose core frame bolt, adjustment center Tighten the bolts afterwards.
Maximum bending capacity
Round pipe / iron pipe ( S=40kgf/mm²)
Bending radius / round tube
Bending radius / square tube