Manual Tube Bender
Manual tube bender The Manual tube bender is a cold bending type simple manual pipe bending machine. There is no need to heat the sand and other processes. The curved arc is smooth, clear and has small deformation. The hydraulic part of the manual hydraulic pipe bending machine uses a fast and...
Manual tube bender
The Manual tube bender is a cold bending type simple manual pipe bending machine. There is no need to heat the sand and other processes. The curved arc is smooth, clear and has small deformation. The hydraulic part of the manual hydraulic pipe bending machine uses a fast and slow hand pump and is equipped with an overload unloading mechanism and an oil filter. The manual hydraulic pipe bending machine has the characteristics of reasonable structure, light weight, small volume and long service life, and is a building, chemical industry, The ideal manual pipe bending tool for plumbing, petroleum, coal and other departments. Easy to use and easy to carry.
Manual pipe bending machine use:
1. Fix the low seat 1 first.
2. Select the die and roller according to the required bend size.
3. When using, insert the die into the low-seat shaft and then put the bracket 2 into the shaft, then put the roller 4 into the positioning block and fasten it with bolts.
4. Turn the bracket to the rocker 11 and insert the bent tube between the die and the roller. Adjust the nut 8 so that the die, tube and roller fit together to rotate the handle.
1. High processing precision and stable processing quality;
2. It can carry out multi-coordinate linkage and can process parts with complex shapes;
3. When the machining parts are changed, generally only need to change the NC program, which can save production preparation time;
4. The machine tool itself has high precision and rigidity, and can choose favorable processing amount, and the productivity is high (usually 3~5 times of ordinary machine tools);
5. The degree of automation of the machine tool is high, which can reduce the labor intensity;
6. The quality of the operators is high, and the technical requirements for maintenance personnel are higher.
7. Hydraulic pipe bending machine is suitable for pipelines and repairs in factories, warehouses, docks, buildings, railways, automobiles, etc.
8. Hydraulic pipe bending machine range: for general water pipes, conduits, gas pipes, thick steel pipes, etc., the angle of bending is up to 90 degrees;
9. The manual pipe bender has the characteristics of advanced design, compact structure, simple operation and convenient maintenance. It is a cold-formed simple manual pipe bender that does not require heating and sand filling and can be bent at one time.
10. The arc is smooth, clear and small. The manual pipe bender is to fix the bending machine vise according to the figure, select the wheel die according to the outer diameter of the bent pipe, respectively insert it under the movable plate of the pipe bending machine, cover the movable plate, and tighten the adjusting screw. Bent pipe.
|Curved tube method|
coreless, cold bend, push type
60: Bend pipe diameter φ22-φ60 Molding specification 22.214.171.124.60
80: Bend pipe diameter φ22-φ80 Molding specification 126.96.36.199.60.76
Curved pipe wall thickness
r=4* pipe diameter
Hydraulic cylinder stroke
Manual pump working pressure