Hydraulic Tubing Bender for Sale
hydraulic tubing bender for sale The hydraulic tubing bender for sale is mainly composed of three parts: mechanical part, hydraulic system and PLC control system. The mechanical part mainly consists of a pipe clamping device, a bending pipe transmission device, a boosting device, a bed body and...
hydraulic tubing bender for sale
The hydraulic tubing bender for sale is mainly composed of three parts: mechanical part, hydraulic system and PLC control system. The mechanical part mainly consists of a pipe clamping device, a bending pipe transmission device, a boosting device, a bed body and a bending pipe mold. The bending die is fixed on the main shaft and rotates together with the main shaft, and the pipe is fixed on the clamping groove of the fan-shaped bending die by the clamping die, and the movable auxiliary guiding pressing chute is closely attached to the curved outer side of the blank, when bending When the tube mold is rotated at an angle, the tube is wound around the circumference of the bending mold, and the angle of rotation of the bending mold is the bending angle. The three-dimensional multi-bend of the same radius realized on one pipe member mainly has three major actions of linear feeding, space turning and bending, that is, after completing a bending, the pipe is sent to the next bending position and rotated through a space angle. Then, proceed to the next bend to get the space bend of the same bending radius. The bending mode determines the bending radius.
Operating specifications for hydraulic pipe benders:
1. Before operation, first check whether the lubrication points are short of oil, whether the moving mechanism is loose, whether the safety protection device is reliable, and can be operated after confirmation.
2. When starting the oil pump, the system pressure is kept within the specified range. If it is high, the hydraulic components are damaged and the power is wasted. If it is too low, it will affect the work.
3. Adjust the position and required angle of the part.
4. Adjust the positioning of the mechanism to the required length.
5. Adjust the vertical lifting rail so that the guiding mold pressing cylinder advances to clamp the tight iron pipe.
6. The clamping die cylinder can clamp the iron pipe.
7. Normal operation put the workpiece into the bending mold, and the front end contacts the positioning, and the foot switch is pressed to complete.
8. When bending, the idea should be concentrated. It is forbidden to put the hand or other items into the work area. In case of emergency, press the emergency stop button, then turn the twist switch to the manual position, and manually reset. If the fault occurs, repair it in time.
9. After the work is finished, cut off the power supply and do the cleaning and lubrication work.
1. Before performing maintenance and wiping of the CNC pipe bending machine, be sure to remember to power off to ensure the safety of the pipe bending machine personnel. Maintenance of the pipe bending machine, limited inspection of the oil level of the fuel tank is essential, if the oil level in the fuel tank is lower than the oil window, then the CNC bending machine should be refueled in time, when we buy a new bend After the pipe machine, we also need to change the oil to the new machine according to the requirements in the manual. After changing the oil, we still need to remember to clean the fuel tank carefully. Especially for the filter, it must be thoroughly cleaned. The filter on the CNC tube bender should be kept in one year.
2. In order to prevent some stolen goods from entering the CNC bending machine, it will affect normal production. In use, we also check the temperature of the oil in the tank to prevent the temperature from being too high and damage the machine. When using the CNC tube bender, if there is noise in the machine, stop using it immediately. After the power is cut off, thoroughly check the tube bender. If it is a big fault, do not handle it yourself. The best one is to sell the bend. Contact the manufacturer of the machine, let the manufacturers send professional after-sales personnel to carry out systematic inspection of the pipe bending machine.
Max.Dis.btw.saddle and die