Aluminum Pipe Cutting Machine
aluminum pipe cutting machine The aluminum pipe cutting machine is suitable for sawing all kinds of special-shaped non-ferrous metals, aluminum, aluminum alloy, copper, copper alloy and other materials, especially suitable for aluminum doors and windows, photo frames, light boxes, screens,...
aluminum pipe cutting machine
The aluminum pipe cutting machine is suitable for sawing all kinds of special-shaped non-ferrous metals, aluminum, aluminum alloy, copper, copper alloy and other materials, especially suitable for aluminum doors and windows, photo frames, light boxes, screens, electronic parts, heat sinks, audio panels, video cards, network cards, CPUs, Precision sawing of hard disk shell, MP3 aluminum shell, U disk aluminum shell, plastic steel, electric wood board, aluminum extrusion type, paper tube and profile.
One, mechanical characteristics:
1. Only the foot switch, mechanical automatic pressing, automatic sawing is safe and easy, manual feeding automatic cutting.
2. The hidden saw blade is sawed from the bottom to the top, which solves the drawbacks of the traditional machine aluminum splash and improves the working environment.
3. Single or multiple materials can be sawed at the same time.
4. According to the size and thickness of the material, the height and speed of the material, the height and speed of the sawing can be set. .
5. Precision forced fuel injection system, improve lubrication and cooling effect, reduce failure rate, extend saw blade life, cut surface without burr, and saw blade is more durable.
6. The saw blade can be repaired and reused.
7. Open and cut 45° and 90° angles.
8. Four-bar linkage design ensures rigidity and plane accuracy. A stable cutting force output can be obtained at any position on the cutting surface;
9. Intermittent single stroke operation and two-handed key activation device to ensure safe operation;
10. The cutting force fine adjustment device helps to provide the best punching and cutting pressure, protect the cutter and extend the service life of the cutting base.
11. The upper pressure plate automatically decelerates 10 cm above the cutter to make the cutting performance more stable and the effect is more perfect.
12. The central automatic lubrication system ensures the accuracy of the parts and improves the durability of the equipment.
13. The cover is equipped on both sides of the machine to prevent the operator from entering the cutting area;
14. The hydraulic system is equipped with a safety valve to prevent overload of the hydraulic system;
15. Each motor is equipped with an isolating switch;
16. All protection switches (auxiliary contacts) are connected to the corresponding power circuit control;
17. The device encounters an abnormal power failure during normal operation and then automatically recovers that the power supply will not automatically recover;
18. When the machine is abnormal, press the reset button to resume normal operation of the machine;
19. It can realize single or multiple simultaneous sawing according to the size of the material, effectively increasing the production capacity by up to 3 times;
20. The workpiece cutting precision is stably controlled within ±0.1mm, and the spindle precision is within 0.01mm;
21. It adopts stepwise transverse feeding, which is more stable and can be used with ultra-thin saw blades to save thousands of dollars per day.
22. With the micro-lubrication device and special cutting oil for aluminum alloy, the service life of the saw blade can be increased by more than 30%;
TCT circular saw blade
Horizontal Vertical Clamping
Sawblade rotation speed
50-160(stepless speed control)
Servo Motor power
1.0 AC servo motor,ball screw
2.0 AC servo motor,ball screw
Mist cooling device
Automatic feed length
The longest 800