Tel: +86 13921985178

E-mail: Annyzhao2000@hotmail.com

CNC Pipe Profile Cutting Machine

CNC Pipe Profile Cutting Machine

CNC pipe profile cutting machine The control interface of the CNC pipe profile cutting machine adopts an operating system based on PLC HMI technology, which is usually equipped with a touch screen and an operation panel. With the man-machine interface, the operator only needs to input the...

Send InquiryChat Now
Product Details

CNC pipe profile cutting machine

The control interface of the CNC pipe profile cutting machine adopts an operating system based on PLC HMI technology, which is usually equipped with a touch screen and an operation panel. With the man-machine interface, the operator only needs to input the parameters such as the size and processing quantity of the material, and the system automatically adjusts the complex parameters such as the saw blade rotation speed and the feed amount per tooth (cutting speed) according to the input parameters. In order to provide the easiest way for the operator to operate. This type of circular saw has high safety and generally works in a fully enclosed state. When a fault occurs, it can be automatically stopped and alarmed, which can avoid casualties and equipment loss, and the processing efficiency is very high.

The control precision is high, the cutting speed is fast, the central operation of the MC405CNC is automatically completed, the staff can use it through short training, and it is controlled by PLC (no CNC program or other special expertise is required)

1. Equipped with automatic feeding and automatic clamping device, it runs smoothly, light and efficient.

3. The cooling system makes the machine run for a long time and prolongs the sawing life.

4. The pressure of the hydraulic system and the clamping pressure are respectively displayed to ensure that the thin-walled tube is not deformed.

The 5.400Y full gear head adopts five sets of gears to be more stable and more wear-resistant. The machine head adopts vertical sliding feed, hydraulic drive, stable operation and light weight.

6. Self-lubricating bearings are used to connect shaft self-lubricating and non-destructive machines

7. This machine is a hydraulic vertical metal cutting saw machine, which can cut ordinary steel, stainless steel, copper, aluminum and other metal profiles of various cross-section shapes. It is especially suitable for cutting various pipes. Pipes are steel pipe furniture, industrial, sports equipment, travel and leisure products, automobiles, motorcycles, bicycles, baby carrier decoration, stainless steel, wrought iron decoration, machining and other industries, is the best equipment for mass production.

8. No burrs, no dust

The bilateral two-way clamp makes the workpiece smooth and the cut surface is smooth and free of burrs. Low noise and low pollution when sawing.

9. Accurate - fast - smooth

The precise cutting speed exceeds the band saw and the hacksaw, and the cut surface is smooth and does not generate heat, saving secondary processing.

10. Bevel or slot

The machine head can be adjusted to the left or right for beveling or milling. The angle is accurate and the pipe connection is perfect.

11. Cooling pump

Circulating cooling system with a large capacity oil storage barrel to ensure the life of the saw blade and the flat surface.

12. It adopts CNC feeding and mechanical positioning to control the cutting, the cutting precision can reach 0.05mm; and the cutting is smooth and smooth without burr, no need for secondary processing.

13. Automatic continuous feeding, no dead ends, no tailings, one person can open multiple machines; save a lot of labor costs for the enterprise.

14. Independent double oil clamps to prevent large tubes from rotating and reduce the situation of explosive saw blades; Independently adjust the pressure of the clamping and lowering knife to prevent the workpiece from being deformed and pinched, which indirectly saves the enterprise a material cost.

15. The double cylinder is used for cutting, ensuring that the rectangular tube does not change the direction of the lower tube, and the cutting is not deformed without burrs.

16. Using intelligent control system to distinguish the material tail and cut off, it is very advantageous for short tube cutting. It automatically measures the length of raw materials (workpieces) and automatically counts them, which reduces the labor intensity for operators and enhances the enthusiasm of employees.

 

model

MC-400AC

Main drive

5HP(or)7-1/2HP(4pole) 50/60HZ

Blade speeds

50HZ 3200RPM

60HZ 3200RPM

Head swivel

L45° /90° R30°

Clamping vise

Single

Coolant pump motor

4oW

Max.clamping capacity

150

Saw blade size

Diameter

TIPΦ405-Φ455

standard Φ405

Bore

Φ25.4

Pin Holes

 -

Bar feeding length

Single stroke

 -

Double stroke

 -

Three stroke

 -

Bar feeding servo motor

 -

Hydraulic pump motor

2HP 4P

Operation pressure

kg/cm2

20-25
Machine dinensions(L×W×H)1300×1400×1900
Weighe600kg

Hot Tags: CNC pipe profile cutting machine, China, suppliers, manufacturers, factory, wholesale, customized, in stock, made in China
Related Products
Inquiry