Manual Tube Cutter
manual tube cutter The manual tube cutter is easy to operate, low in noise and free from dust pollution. The manual clamp is manual, except for the basic configuration, the clamp and the handpiece are manual. It has a good cooling circulation system to ensure the service life of the saw blade....
manual tube cutter
The manual tube cutter is easy to operate, low in noise and free from dust pollution. The manual clamp is manual, except for the basic configuration, the clamp and the handpiece are manual. It has a good cooling circulation system to ensure the service life of the saw blade. After the high-speed steel saw blade is worn, the tooth can be used continuously and the cost of the consumables is low. The saw cut surface has no flanging and burr-free, eliminating the need for two processing steps, and is the best tool for cutting tubes and profiles.
1. Automatic pressure saves time and effort.
2. Automatic saw is safe and easy.
3. The inner saw can reduce noise.
4. The saw is also an automatic fuel injection cooling system, the saw blade is not wasted, and the saw blade is more durable.
5. The saw blade angle is fixed and the cutting precision is improved.
6. The shelf has a positioning panel, which makes cutting materials more convenient.
7. Cut 45° angle.
8. Suitable for cutting aluminum extrusion, aluminum doors and windows, heat sinks, wood, water pipes and sound absorbing panels.
9. The cutting machine is mainly used for processing various plates and cutting into various materials. It is especially suitable for more plate processing, which can completely replace flame cutting and reduce processing cost. It is the ideal equipment for cutting all kinds of metals. Rolling mills, non-ferrous metal factories and plates for smelters. Wide application range, high efficiency, simple operation and convenient maintenance. The main unit can be placed indoors or outdoors. No industry and quotation; three wastes and quotations; no adverse effects on the environment and energy during the use of the machine.
10. The metal circular saw is a manual sawing machine. Ordinary steel, stainless steel, copper and other metal materials can be sawed in various cross-sectional shapes, especially sawing various pipes.
11. This machine has the characteristics of small size. Easy to operate. Low noise, no dust, no burrs inside and outside, high production efficiency, tilting at various angles.
12.Miter When the position of the clamp is constant, only the elbow needs to be rotated to the desired angle (with angle scale), and the machine takes up little space, which is the most ideal and most convenient sawing machine for metal profile cutting.
13.Manual cutting machine with efficient worms and turning.
14.High sawing rate, no noise, no flash.
15.With manual feed, the nose can be rotated 45°.
16.The angle is sharp and easy to adjust, with a two-way fixture manual.
17.Automatic and manual adjustment of the cooling system block size.
18.No edge, no dust, accurate, fast, smooth.
A:2/4 Variable pole 1.8/1.3kw
B:4/8 Variable pole 1.5/0.85kw
Colling water pump
Type B or ac