Semi-auto Square Tube Cutting Machine
semi-auto square tube cutting machine The semi-auto square tube cutting machine is used as an upgrade of the manual pipe cutting machine and a supplementary cutting machine for the automatic pipe cutting machine. Compared with the manual pipe cutting machine, in addition to manual feeding...
semi-auto square tube cutting machine
The semi-auto square tube cutting machine is used as an upgrade of the manual pipe cutting machine and a supplementary cutting machine for the automatic pipe cutting machine. Compared with the manual pipe cutting machine, in addition to manual feeding according to the required length, other workpiece clamping and feeding saws are used for sawing. Cutting, cutting back and retracting the tool, the jig release is automatic control, and the work efficiency is greatly improved; compared with the automatic pipe cutting machine, it has the advantages of being able to be inclined at various angles, and the position of the clamp is unchanged when chamfering Rotate the handpiece to the desired angle (with an angle ruler). The semi-auto square tube cutting machine has a large cutting range, and can cut round pipes of φ140 or less and rectangular pipes of the same specification. For small and medium-sized pipes, many cuttings can be cut at one time, and the cutting ability can also meet various thickness pipes on the market, such as ≦3mm. Stainless steel tube, ≦7mm seamless steel pipe, etc., easy to operate, low noise, no dust, no burr inside and outside the incision
Has the following advantages:
1. Greatly improve and ease installation safety and fire safety;
2, precision cutting, the tube is flat on both sides after cutting, easy to connect
3, the cutting method is simple, fast, saving a lot of working time;
4. Provide a light working method and design the cutting plan according to the workplace (on site);
5, high security, no need to move the pipe by hand when working;
6. No sparks or dust will be generated to the outside when cutting;
7, full-featured, can cut all kinds of built pipelines of the power system;
8. The cutting pipe material is as complete as: steel, stainless steel, cast iron, copper, plastic, multi-layer pipe can be cut;
9. There are no specific requirements for pipe diameter and working platform;
10, good quality and low price, high cost.
11. The way to replace the pipe cutting machine is to replace the local zero, components or key components and key technologies, so as to achieve the purpose of replacing one unit, so that the production capacity, performance, efficiency and machine of the original packaging machinery equipment or production line Types and assembly methods are updated. In this way, most of the components and unit parts are reused, which not only improves the value of equipment, but also saves raw materials and labor, and reduces costs.
12. The semi-automatic pipe cutting machine solves the complicated problem of pipe cutting. In the past, the hand mill cut pipe, which needed to hold the pipe and affect the efficiency.
13. The drawings have been redesigned, which is simpler, more convenient and more efficient. The drawing also adds a plasma pipe cutter to accommodate the cutting of thick pipes. This fixture can meet most of the stainless steel tube 220/159/100 tubes, and the fixture has strong versatility.
14. According to the pipe diameter of the pipe to be cut; when fixing the manual pipe cutting machine, the tightness should be moderate to ensure that the four cutting knives and the outer wall of the pipe are in good contact; when cutting, apply the rocker to the manual pipe cutting machine Pull in one direction and apply even force; every half turn of the manual pipe cutting machine, you can use the rocker to tighten the nut to feed the knife.
15. The pipe cutting machine has simple structure, small volume and convenient operation, and can be applied to cutting operations of different calibers, different media and different temperature pipelines.
16. The working space is small, and it can cut large diameter steel and cast iron pipe fittings in a limited space. When cutting a 200 mm tube, only 100 mm of operating space is required around the tube; when cutting a 500 mm tube, only 200 mm of operating space is required around the tube.
|Saw Blade Size(mm)|
Rotating speed of the main shaft(rmp)
Saw Blade size(mm)
TCLΦ355-Φ455 Bearing Φ25.4