Tel: +86 13921985178

E-mail: Annyzhao2000@hotmail.com

Furniture Tube End Forming Machine

Furniture Tube End Forming Machine

furniture tube end forming machine furniture tube end forming machine is a processing and forming device for flaring, shrinking and shrinking the pipe end of the metal pipe member, and is widely used for processing and forming joint parts of the pipe fitting, automobile oil pipe, water pipe and...

Send InquiryChat Now
Product Details

furniture tube end forming machine

furniture tube end forming machine is a processing and forming device for flaring, shrinking and shrinking the pipe end of the metal pipe member, and is widely used for processing and forming joint parts of the pipe fitting, automobile oil pipe, water pipe and air conditioning pipe.

The equipment has a total of 1-6 stations to choose from, which can automatically change the mold. Different molds can be used to realize the expansion, shrinkage, shrinkage, drum and pier reinforcement of the pipe fittings to ensure the processing precision of the products. The feeding method can be manual or automatic, through the CNC control system, Chinese and English display interface, man-machine dialogue operation, and automatic counting function.

The pipe end forming machine is mainly composed of a fuel tank, a frame, a slider, a main oil cylinder, a limit cylinder, a compression cylinder, a displacement cylinder, an axial positioning cylinder and an axial positioning contact iron.

The working principle is that the workpiece is manually or automatically fed, and the positioning cylinder (F-type fixed-length stopper) is used for positioning (the F-type fixed-length stopper is connected with the end of the piston rod of the fixed-length cylinder, and after the stopper is extended, the workpiece is placed. When entering the clamping die, let the end face contact the stop positioning surface, and the workpiece clamps the rear stop to ensure the reserved length of the pipe end before forming). The workpiece is clamped by the clamping part (the clamping part is divided into upper and lower parts, the lower mold is mounted on the main frame, the upper mold is connected with the clamping cylinder piston rod, and the upper and lower molds are separated in the non-working state, work When the workpiece is placed in the clamping mold, the cylinder is clamped, the upper and lower molds are put together, and the workpiece is clamped.)

The process of tube end forming needs to be completed by a combination of different punches and clamping dies. Different shapes require different molds and corresponding clamping dies to be machined, and multiple shapes can be processed simultaneously.

 

Pipe end forming machine characteristics

1. Pipe end forming machine with manual and fully automatic multiple operating functions.

2. Mobile foot switch for emergency stop and high safety.

3. The pipe end forming machine has a cooling system to make the machine run stably.

4. The quick changeover device of the pipe end forming machine is more conducive to elastic production.

5. The compact shape and high steel structure minimize the interference range of the machine.

6. The oil circuit adopts a closed circuit and precise control.

7. The length of the machined workpiece can be lengthened.

8. Can be used as a pipe expander and an inner plug machine.

9. Electronic control circuit, hydraulic system control, easy maintenance, correct maintenance action without mistakes.

10. Simple panel design for easy handling and maintenance.

11. The tube end forming machine has a workload counting function.

12. Microcomputer control, hydraulic drive, Chinese subtitle display, man-machine dialogue operation, you can choose manual, semi-automatic, fully automatic operation mode, pedal switch has a variety of functions to start and stop.

13. It can be controlled by single station, double station, three station and multi-station. At the same time, it can be used for multiple shrinkage and expansion, and the linear guide is used as the carrier to make it run smoothly and without wear, and the product has good repeatability. The processing shape is: concave, convex, long deviation, square, extension, oblique, V-shaped, open elbow, flat elbow---etc., depending on the workpiece to change the shape of the mold.

14. Double head shrinking machine can adjust the distance between the two heads according to the length of the processing pipe.

15. Single or double clamping can be selected according to the length of the pipe.

16. The machine has the characteristics of convenient operation, stable performance, high work efficiency and high safety factor. It is an ideal equipment for the pipe fitting processing industry.

 

Ways to check whether the bender is good or bad

1. Mould seat hardness and mold hardness are also the key to the normal use of hydraulic pipe bending machine. When the hardness of the mold base is lower than the Rockwell HRC60 mold hardness is lower than the Rockwell HRC50, it will affect the buckle quality of the hose.

2. Measure the main parameters of the hydraulic pipe bending machine: let the hydraulic pipe bending machine be in the state of empty running, touch each die block by hand, the hand should not have jitter, otherwise it will be regarded as unqualified product.

3. Put the hydraulic pipe bending machine on the mold, press a sample joint, measure the crimping joint with a caliper or a micrometer, and round and taper should be buckled within 0.1mm, which is considered excellent.

4. Finally, check the eight-lobed equalization of the hydraulic pipe bending machine mold base and the flatness of the mold. Good hydraulic bending machines have special control adjustments for these two items, and some poor quality hydraulic pipe bending machines do not control the above two parameters.

 

Maximum applicable fittings

Φ40*2t

Maximum working stroke

150mm

Oil pressure output

10Ton

Station

1 or 2

Punch spacing

65mm

Hot Tags: furniture tube end forming machine, China, suppliers, manufacturers, factory, wholesale, customized, in stock, made in China
Related Products
Inquiry